Fog Lights Home > How To's > Fog Lights Fog Lights
GM, as usual wants way too much money for it's parts. So, if you need a new fog light, simply go down to Walmart or just about any autoparts store and pick up a set of these BLAZER foglamps. Their much cheaper, and fit directly into the original housings. They produce a set witch uses a yellow tinting for those of you that would prefer a yellow fog light.
-Evan Plotkin explains installation:
It doesn't get much easier than
Keep the original housing that bolts to the frame of the truck.
Take the new lens, put the bulb in ( if you are not using the ones that come with the kit) then just mach the ground wire from the new lens to the original housing and the positive should match with out a problem.
T hats it, put the two lens cover
screws and plates on and give it a try.
I have done this about 10 times with all success
note: you do not need anything from the light kit except the lens and bulbs.
black ty #0070
STOCK FOG LIGHT PART NUMBERS
|Bracket Mtg. Left||15637857|
|user contributed notes|